304 stainless steel square spot zero cut square steel
Product description
1. Hot rolled square steel refers to the steel rolled or processed into a square section. Square steel can be divided into hot rolled and cold rolled two kinds; Hot rolled square steel side length 5-250mm, cold drawn square steel side length 3-100mm.
2. Cold drawing steel refers to the forging shape of the square cold drawing steel.
3. Stainless steel square steel.
4. Twist and twist square steel.
Twisted twisted square steel diameter of 4mm- 10mm, commonly used specifications for 6*6mm and 5*5mm two, respectively by the diameter of 8mm and 6.5mm of the disk element drawn and twisted.
Material: Disc Q235.
Torque: The standard torque is 120mm/360 degrees, the standard torque is relatively beautiful and practical.
Application: Widely used in steel lattice, steel structure or reinforced concrete to replace rebar.
Advantages: twisted square steel to increase the structure tension, beautiful appearance, greatly reduce the cost of capital; Angular, accurate diameter.
Product uses
Mainly in fine decoration with more, such as doors and Windows.
Product packaging
According to customer request.
Company profile
Shandong Zhongao Steel Co. LTD. is a large-scale iron and steel enterprise integrating sintering, iron making, steel making, rolling, pickling, coating and plating, tube making, power generation, oxygen production, cement and port.
The main products include sheet (hot rolled coil, cold formed coil, open and longitudinal cut sizing board, pickling board, galvanized sheet), section steel, bar, wire, welded pipe, etc. The by-products include cement, steel slag powder, water slag powder, etc.
Among them, fine plate accounted for more than 70% of the total steel production.
Related products
-
50×50 Square Steel Tube Price, 20×20 Black Anne...
Technical Parameter Place of Origin: China Application: Structure Pipe Alloy Or Not: Non-Alloy Section Shape: square and rectangular Special Pipe: square and rectangular steel tube Thickness: 1 - 12.75 mm Standard: ASTM Certificate: ISO9001 Technique: ERW Grade: Q235 Surface Treatment: black painting, galvanized, annealing Supply Ability: 5000 Ton/Tons per Month Packaging Details: metal pallet+ steel bel...
-
Cold Rolled Alloy Round Bar
Specification Of Cold Rolled Round Bar Product Name Hot rolled round bar Grade A36、Q235、S275JR、S235JR、S355J2、St3sp Origin China(Mainland) Certificate ISO9001.ISO14001.OHSAS18001,SGS Surface Treatment Chromated, Skin Pass, Dry,Unoild, Etc Diameter 5mm-330mm Length 4000mm-12000mm Tolerance Diameter+/-0.01mm Application Anchor Bolts、Pins、Rods、Structural Parts、Gears、Ratchets、Tool Holders. Packin...
-
Pickling Hot Rolled Steel Coil
Dimensions The size of the steel plate should meet the requirements of the table "Dimensions and Specifications of Hot Rolled Steel Plates (Excerpted from GB/T709-1988)". The size of the steel strip should meet the requirements of the table "Dimensions and Specifications of Hot Rolled Steel Strip (Excerpted from GB/T709-1988)". The width of the steel plate can also be any size of 50mm or a multiple of 10mm. The length of th...
-
Hot Rolled Steel Coil
Product Concept Hot rolled (Hot rolled), that is, hot rolled coil, it uses slab (mainly continuous casting billet) as raw material, and after heating, it is made into strip steel by rough rolling mill and finishing mill. The hot steel strip from the last rolling mill of finishing rolling is cooled to a set temperature by laminar flow, and then coiled into a steel coil by the coiler. The cooled steel coil undergoes different...
-
201 Stainless Steel Angle Steel
Product Introduction Standards: AiSi, ASTM, DIN, GB, JIS Grade: SGCC Thickness: 0.12mm-2.0mm Place of Origin: Shandong, China Brand Name: zhongao Model: 0.12-2.0mm*600-1250mm Process: Cold rolled Surface treatment: galvanized Application: Container Board Special purpose: high-strength steel plate Width: 600mm-1250mm Length: customer request Surface: galvanized coating Material: SGCC/ C...
-
Construction square rectangular pipe welded bla...
Product description We offer round, square and shaped welded steel tubes. Material, size can be selected according to customer needs. We also provide surface treatment services: A. sanding B.400#600# mirror C. Hairline drawing D. tin-titanium E.HL wire drawing and mirror (2 finishes for one tube). 1. Hot rolling, cold rolling or cold drawing technology. 2. Hollow section, lighter weight, higher pressure....