316 And 317 Stainless Steel Wire
Introduction To Steel Wire
Stainless steel wire drawing (stainless steel wire drawing): a metal plastic processing process in which a wire rod or a wire blank is drawn from a die hole of a wire drawing die under the action of a drawing force to produce a small-section steel wire or a non-ferrous metal wire. Wires with different cross-sectional shapes and sizes of various metals and alloys can be produced by drawing. The drawn wire has precise dimensions, smooth surface, simple drawing equipment and molds, and easy manufacturing.
Product Display
Process Characteristics
The stress state of wire drawing is the three-dimensional principal stress state of two-way compressive stress and one-way tensile stress. Compared with the principal stress state where all three directions are compressive stress, the drawn metal wire is easier to reach the state of plastic deformation. The deformation state of drawing is a three-way main deformation state of two-way compression deformation and one tensile deformation. This state is not good for the plasticity of metal materials, and it is easier to produce and expose surface defects. The amount of pass deformation in the wire drawing process is limited by its safety factor, and the smaller the amount of pass deformation, the more the drawing passes. Therefore, multiple passes of continuous high-speed drawing are often used in the production of wire.
Product Category
Generally, it is divided into 2 series, 3 series, 4 series, 5 series and 6 series stainless steel according to austenitic, ferritic, two-way stainless steel and martensitic stainless steel.
316 and 317 stainless steel (see below for the properties of 317 stainless steel) are molybdenum-containing stainless steels. The content of molybdenum in 317 stainless steel is slightly higher than that of 316 stainless steel. Due to the molybdenum in steel, the overall performance of this steel is better than 310 and 304 stainless steel. Under high temperature conditions, when the concentration of sulfuric acid is lower than 15% and higher than 85%, 316 Stainless steel has a wide range of uses. 316 stainless steel also has good resistance to chloride corrosion, so it is usually used in marine environments. 316L stainless steel has a maximum carbon content of 0.03, which can be used in applications where annealing cannot be carried out after welding and maximum corrosion resistance is required
Related products
-
Cold Drawn hexagonal Stainless Steel Bar 200 30...
Product Category In the special-shaped pipe is generally according to the section, the overall shape to distinguish, generally can be divided into: Oval shaped steel pipe, triangular shaped steel pipe, hexagonal shaped steel pipe, diamond shaped steel pipe, stainless steel pattern pipe, stainless steel U-shaped steel pipe, D-shaped pipe, stainless steel bend, S-shaped pipe bend, octagonal shaped steel pipe, semi-circular sh...
-
Manufacturer custom hot-dip galvanized Angle steel
Scope of application Application: Angle steel is a long steel belt with vertical angular shape on both sides. It is widely used in various building structures and engineering structures, such as beams, Bridges, transmission towers, cranes, ships, industrial furnaces, reaction towers, container racks, cable tray supports, power pipelines, bus support installation, warehouse shelves, etc. ...
-
Pickling Hot Rolled Steel Coil
Dimensions The size of the steel plate should meet the requirements of the table "Dimensions and Specifications of Hot Rolled Steel Plates (Excerpted from GB/T709-1988)". The size of the steel strip should meet the requirements of the table "Dimensions and Specifications of Hot Rolled Steel Strip (Excerpted from GB/T709-1988)". The width of the steel plate can also be any size of 50mm or a multiple of 10mm. The length of th...
-
Stainless steel elliptic flat elliptic tube wit...
Product description Special-shaped seamless steel pipe is widely used in various structural parts, tools and mechanical parts. Compared with the round tube, the special-shaped tube generally has a larger moment of inertia and section modulus, a larger bending and torsional resistance, can greatly reduce the weight of the structure, save steel. Steel pipe shaped pipe can be divided into oval shap...
-
Stainless Steel Wire 304 316 201, 1mm Stainless...
Technical Parameter Steel Grade: stainless steel Standard: AiSi, ASTM Place of Origin: China Type: Drawn Wire Application: MANUFACTURING Alloy Or Not: Non-Alloy Special Use: Cold Heading Steel Model Number: HH-0120 Tolerance:±5% Port: China Grade:stainelss steel Material:Stainless Steel 304 Key word:Steel Wire Rope Concrete Anchors Function:Construction Work Usage:Construction Materilals Packing: Roll Di...
-
DN20 25 50 100 150 Galvanized steel pipe
Product description The galvanized steel pipe is immersed in a zinc coating to protect the pipe from corrosion in wet environments, thus extending the service life. It is most commonly used in plumbing and other water supply applications. Galvanized pipe is also a low cost alternative to steel and can achieve up to 30 years of rust protection while maintaining a comparable strength and durable surface co...