Pickling Hot Rolled Steel Coil
Dimensions
The size of the steel plate should meet the requirements of the table "Dimensions and Specifications of Hot Rolled Steel Plates (Excerpted from GB/T709-1988)".
The size of the steel strip should meet the requirements of the table "Dimensions and Specifications of Hot Rolled Steel Strip (Excerpted from GB/T709-1988)".
The width of the steel plate can also be any size of 50mm or a multiple of 10mm.
The length of the steel plate is any size of 100mm or a multiple of 50mm, but the minimum length of the steel plate with a width less than or equal to 4mm shall not be less than 1.2m, and the minimum length of a steel plate with a thickness greater than 4mm shall not be less than 2m.
According to the requirements, the thickness of steel plate less than 30mm, the thickness interval can be 0.5mm.
According to needs, after negotiation between the supplier and the buyer, steel plates and strips of other sizes can be supplied.
Specification
Common thickness: 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.35, 2.45, 2.50, 2.70, 2.75, 2.8, 2.9, 2.95, 3.0, 3.25, 3.3, 3.5, 3.75, 3.8, 3.9, 3.95, 4, 4.25 , 4.5, 4.7, 4.75, 5, 5.5, 5.75, 6, 6.75, 7, 7.5, 7.75, 8, 8.75, 9, 9.5, 9.75, 10, 10.5, 11, 11.5, 12
Main Products
Hot continuous rolling can be divided into ordinary carbon structural steel, low alloy steel, and alloy steel according to its material and performance. According to their different uses, they can be divided into: cold forming steel, structural steel, automotive structural steel, corrosion-resistant structural steel, mechanical structural steel, welded gas cylinder and pressure vessel steel, pipeline steel, etc.
Production Process
The hot-dip galvanized hot-rolled plate unit adopts an improved Sendzimir annealing process, and the raw material is hot-rolled pickled coils. The production process is as follows:
Hot-rolled pickled coil → uncoiling → cutting head and tail → welding → entrance looper → modified Sendzimir horizontal annealing furnace → hot-dip galvanizing → cooling after plating → zinc layer thickness gauge → smoothing and straightening → passivation treatment → Inspection table → Electrostatic oiling → Coiling → Weighing and packing → Finished product storage.
product display
Related products
-
Hot Rolled Pickled Oil Coated Coil
Specification The thickness is 0.2-4mm, the width is 600-2000mm, and the steel plate length is 1200-6000mm. Production Process In the production process, heating is not carried out, so there are no defects such as pitting and iron scale that often occur in hot rolling, and the surface quality is good and the smoothness is high. Moreover, the di...
-
High-Precision Pattern Coil
Product Introduction The specifications of checkered steel plates are expressed in terms of basic thickness (not counting the thickness of the ribs), and there are 10 specifications of 2.5-8 mm. No. 1-3 is used for checkered steel plate. Class B ordinary carbon structural steel is rolled, and its chemical composition meets the requirements of GB700 "Technical Conditions for Ordinary Carbon Structural Steel". The height of t...
-
Hot Rolled Steel Coil
Product Concept Hot rolled (Hot rolled), that is, hot rolled coil, it uses slab (mainly continuous casting billet) as raw material, and after heating, it is made into strip steel by rough rolling mill and finishing mill. The hot steel strip from the last rolling mill of finishing rolling is cooled to a set temperature by laminar flow, and then coiled into a steel coil by the coiler. The cooled steel coil undergoes different...
-
A36 SS400 S235JR Hot Rolled Steel Coil /HRC
Surface Quality Is Divided Into Two Levels Ordinary precision: the surface of the steel plate is allowed to have a thin layer of iron oxide scale, rust, surface roughness caused by the peeling of iron oxide scale, and other local defects whose height or depth exceeds the allowable deviation. Unobvious burrs and individual traces whose height does not exceed the pattern height are allowed on the pattern. The maximum area of ...